The Operation And Maintenance Of Cement Brick Machine

Operation And Maintenance For Cement Brick Machine

1. Before using, you should check the screw belt of every component to avoid they are loosen, and add lubrication oil to the lubrication part. Then check the circuit line is good or not, and make sure the cement brick machine is operating normally.

2. Turn on the electricity of the concrete brick making machine, put the pallet on the vibrating platform, feed the mixed aggregate into the hopper, start the vibrating platform for 3-5 seconds, and then de-mould, vibrating on both sides of the equipment.

3. (1) 150-300 hours after starting the hollow brick machine for the first time, the reduction box should be changed the gear oil.

(2) Every time after using the interlocking brick making machine for 1500 hours, it needs to be changed the gear oil for one time.

(3) Check the screw before operating, and add the lubricating oil to test run the equipment.

(4) Clean and scrub the paving brick making machine timely after working to protect the machine from damaging by fouling, so that it can normally work. It must be noted that it’s prohibitive to use water for cleaning, because the waster will do harm to the electrical components.

The Meaning Of Above Measures For Cement Brick Machine

Above is the the brief introduction of the concrete block machine, which is a good news to the engineers as well as social people. That’s because it makes the engineers finish the project faster and people can live in better and safer houses, in order to make a great contribution to the national energy saving policy.